Page Title Center

Indicazioni

Dimensioni:Spessore: 0,05 mm - 16 mm
Larghezza: ≥ 610 mm, 1000 mm, 4' (1219 mm), 1220 mm, 1500 mm, 2000 mm
Il formato su misura deve essere confermato con noi

Stato di consegna: laminato a freddo, laminato a caldo

Finitura: 2B, No.1, 1D, No.2, No.4, BA, 6K, Finitura a specchio, 8K, Linea dei capelli con PVC

MillOrigin: TISCO, ZPSS, BAOSTEEL, JISCO, ZSESS, ATI, SMC, HAYNES, VDM, ArcelorMittal, Outokumpu,        ecc. 

Norme: ASTM A240, ASTM A480, JIS G4303, BS 1449, DIN17441, G4305

Caratteristiche: superficie luminosa, anticorrosiva, resistenza al calore, alte prestazioni di tenacità e proprietà meccaniche, resistenza agli acidi e agli alcali, resistenza all'ossidazione.

Applicazioni: impianti chimici, industria alimentare, industria medica, petrolio, energia, elettrodomestici, edilizia, veicoli, pentole e così via.

Specifiche delle lamiere e delle piastre dell'acciaio inossidabile: ASTM A240 / ASME SA240
Standard dimensionale: JIS, AISI, ASTM, GB, DIN, EN, ecc
Larghezza: 1000 mm, 1219 mm, 1500 mm, 1800 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, ecc
Lunghezza: 2000 mm, 2440 mm, 3000 mm, 5800 mm, 6000 mm, ecc
Spessore : da 4 mm a 120 mm
Forma: bobine, lamine, rotoli, lamiera piana, lamiera di spessore, lamiera perforata, lamiera a scacchiera, striscia, piatte, grezzo (cerchio), anello (flangia) ecc.
Finitura superficiale: lamiera laminata a caldo (HR), lamiera laminata a freddo (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, specchio, a scacchiera, goffrata, linea dei capelli, sabbiatura, pennello, incisione, raso (incontrato con rivestimento in plastica) ecc.

Specifica: ASTM A240 / ASME SA240
Dimensione standard: JIS, AISI, ASTM, GB, DIN, EN, ecc
Larghezza: 5mm-150mm, ecc
Lunghezza: 4,00 mm-100 mm, ecc
Spessore: da 4 mm a 100 mm
Forma: bobine, fogli, rotoli, lamiere semplici, lamiere di spessore, lamiere perforate, lamiere a scacchi, strisce, appartamenti, spazi vuoti (cerchio), anello (flangia) ecc.    
Finitura superficiale: lamiera laminata a caldo (HR), lamiera laminata a freddo (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, specchio, a scacchi, in rilievo, linea dei capelli, sabbiatura, pennello, incisione, SATINATO (rivestito in plastica) ecc.

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Specificazione di lamiere e piastre in acciaio inossidabile 202
Specifiche di lamiere e piastre in acciaio inossidabile: ASTM A240 / ASME SA240
Dimensione standard: JIS, AISI, ASTM, GB, DIN, EN, ecc
Larghezza: 1250 MM / 1500 MM / 2000 MM / 04 piedi / 05 piedi e larghezza di taglio personalizzata secondo il requisito
Lunghezza: 2400 MM / 2420 MM / 6000 MM / 08 piedi / 10 piedi / Taglio in bobina e lunghezza di taglio personalizzata secondo il requisito
Spessore: SPESSORE DA 0,6 MM A 80 MM
Forma: bobine, fogli, rotoli, lamiere semplici, lamiere di spessore, lamiere perforate, lamiere a scacchi, strisce, appartamenti, spazi vuoti (cerchio), anello (flangia) ecc.
Finitura superficiale: lamiera laminata a caldo (HR), lamiera laminata a freddo (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, specchio, a scacchi, in rilievo, linea dei capelli, sabbiatura, pennello, incisione, SATINATO (rivestito in plastica) ecc.

Specifiche di 316LMOD / 316L UG / 724L / EN 1.4435 Tubo / tubo in acciaio inossidabile senza saldatura 3000 mm
Specifiche del tubo/tubo in acciaio inossidabile senza saldatura: ASTM SA-240/SA-213
Standard di dimensione: JIS, AISI, ASTM, GB, DIN, EN, ecc
La maggior parte delle dimensioni dei tubi senza saldatura sono disponibili trafilati a freddo e rifiniti a caldo. La maggior parte delle dimensioni, con diametro esterno da 3/4" sia senza saldatura che saldato, si incontrano
Diametro Dimensioni: senza saldatura - da 1/2" NB A 18" NB/Saldato / ERW- 1" NB A 16" NB/EFW - DA 8" NB A 110" NB
Forma: bobine, lamine, rotoli, lamiera piana, lamiera di spessore, lamiera perforata, lamiera a scacchiera, striscia, piatti, vuoto (cerchio), anello (flangia) ecc.

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Specifications : ASTM A790 / ASME SA790, ASTM A789 / ASME SA A789
Grade : UNS S31803, S32205
Size : ½”NB – 24”NB
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Outer Diameter: 6.0-630mm
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request

Specifications : ASTM A790 / ASME SA790, ASTM A789 / ASME SA A789
Grade : UNS S31803, S32205
Size : ½”NB – 24”NB
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Outer Diameter: 6.0-630mm
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request

Specification of Stainless Steel 202 Seamless Welded Pipes And Tubes

Stainless Steel Pipe Specification : ASTM A312, A358 / ASME SA312, SA358
SS Tube Specification : ASTM A213, A269, A249, A511, A554 / ASME SA213, SA269, SA249, SA511, SA554
Pipe Size : 1/8” NB to 24” NB, 1/4” OD to 24” OD sizes.
Tube Size : 1/2" OD to 8" OD.
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Outside Finish : 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request